Includes: remove sheet metal jacket, check and repair insulation as needed, re-cover sides with aluminum sheets, repaint heads and leg supports, install new 1.5 HP Copeland R-404A refrigeration unit, Cutler Hammer electrical panel wired for automatic operation with fused disconnect, new single bleeder, new dual ASME safeties (sized for outdoor installation), new Jamesbury stainless steel ball valves on one each 1” vapor balance and 1.5” liquid fill lines (w/CGA fittings and hose blow-down valves), and 1” vapor and 1” liquid process lines and three ½” instrument isolation valves, rebuilt Barton liquid level indicator, new pressure indicator, fabricate cover over the refrigeration unit and complete check out with all controls set for proper operation.

National Board #19321         PRICE REDUCED!

National board #41768

Tomco "C" Style - Price Includes: remove sheet metal jacket, check and repair insulation as needed, re-cover sides with aluminum sheets, repaint heads and supports, new oak insulators under tank supports with new hardware as needed, install new 2 HP Copeland R-404A refrigeration unit with new electrical controls for automatic operation, new dual single bleeder, new dual ASME safeties (sized for outdoor installation), new Jamesbury stainless steel ball valves on one each " vapor balance and 1.5" liquid fill lines (w/CGA fittings and hose blow-down valves), and 1" vapor and 1" liquid process lines and three 1/2" instrument isolation valves, rebuild existing liquid level indicator, new pressure indicator, recover control cabinet with pre-painted white aluminum sheet with new hardware and complete check out with all controls set for proper operation.  

National Board #4332, 5773, 3312, 1133

Taylor Wharton/Amerigas Price includes: remove aluminum sheets off sides, repair the insulation as needed, recover with pre-painted aluminum sheets, repaint heads and leg supports, install new 2 HP Copeland R-404A refrigeration system. Cutler Hammer electrical controls with fused disconnect, motor starter, Allen Bradley pressure switch, control voltage relay and all other controls necessary for automatic operation, new dual bleeders, new or rebuilt dual ASME safeties (sized for outdoor installation), new Jamesbury Eliminator stainless steel ball valves on one each 1" vapor balance and 1.5" liquid fill lines (w/CGA fittings and hose blow-down valves), and 1" vapor and 1" liquid process lines and three /2" instrument isolation valves, rebuild existing Barton liquid level indicator, new pressure indicator, recover control cabinet with pre-painted white aluminum sheets with new hardware.  Complete check out with all controls set for proper operation.

National Board #25

Price includes: Repair insulation as needed, cover sides with prepainted white aluminum sheets, repaint heads and saddles, install new Copeland 3HP R404A refrigeration unit with a new Cutler Hammer electrical panel wired for automatic operation, new dual bleeders, new dual ASME safeties (sized for outdoor installation), new Jamesbury stainless steel ball valves on 1 each 1" vapor balance and 1 1/2" liquid fill lines (w/CGA fittings and hose blow down valves), and 1" vapor and 1" liquid process lines and 3 each 1/2" instrument isolation valves, rebuild existing liquid level indicator, new pressure indicator, recover fold down refrigeration cabinet and complete check out with all controls set for proper operation.

National Board #1301 460 volt/3 ph

Price includes: Remove aluminum sheets off sides, repair the insulation as needed, recover with prepainted aluminum sheets, repaint heads and leg supports, install new 3 HP Copeland R404A refrigeration system.  New Cutler Hammer electrical controls with fused disconnect, motor starter, Allen Bradley pressure switch, control voltage relay and all other controls necessary for automatic operation, new dual bleeders, new or rebuilt dual ASME safeties (sized for outdoor installation), new Jamesbury eliminator stainless steel ball valves on 1 each 1" vapor balance and 1 1/2" liquid fill lines (with CGA fittings and hose blow down valves), and 1" vapor and 1" liquid process lines and 3 1/2" instrument isolation valves, rebuilt existing Barton liquid level indicator, new pressure indicator, recover control cabinet with prepainted white aluminum sheets with new hardware and complete check out with all controls set for proper operation.

National Board #103, 352, 124307

NB: 46 and 42

Price includes: Remove aluminum sheets off sides, repair the insulation as needed, recover with prepainted aluminum sheets, repaint heads and leg supports, install new 6HP Copeland R404A refrigeration system.  New Cutler Hammer electrical controls with fused disconnect, motor starter, Allen Bradley pressure switch, control voltage relay and all other controls necessary for automatic operation, new dual bleeders, new or rebuilt dual ASME safeties (sized for outdoor installation), new Jamesbury Eliminator stainless steel ball valves on 1each 1" vapor balance and 1" liquid fill lines (with CGA fittings and hose blow down valves), and 1" vapor and 1" liquid process lines and 3" instrument isolation valves, rebuilt existing Barton liquid level indicator, new pressure indicator, recover control cabinet with prepainted white aluminum sheets with new hardware and complete check out with all controls set for proper operation.

National Board #26, 702

Price Includes: Pressure vessel built per the ASME code with 280 psig maximum allowable working pressure, remove aluminum sheets off sides, repair the insulation as needed, recover with pre-painted aluminum sheets, repaint heads and supports as needed, new dual bleeders, new or rebuilt dual ASME safeties (sized for outdoor installation), new Jamesbury Eliminator stainless steel ball valves on one each vapor balance and liquid fill lines (w/CGA fittings and hose blow-down valves), and vapor and liquid process lines and three instrument isolation valves, rebuild existing Barton liquid level indicator, new pressure indicator,  fabricate separate refrigeration control cabinet which includes a new 6 HP Copeland R-404A refrigeration system and new Cutler Hammer electrical control panel with fused disconnect, motor starter, Allen Bradley pressure switch, control voltage relay and all other controls necessary for automatic operation and complete check out with all controls set for proper operation

National Board #2040

NOTE: The price includes placing the tank in vertical position and testing the refrigeration system, instruments and all valves with liquid carbon dioxide in the vessel for a minimum of 48 hours.  After testing, the refrigeration charge (R-404A) will be pumped into the reservoir and sealed off.  The lines will be cut and capped for shipment.  Connecting the system on site will be done by others and requires connecting all lines, pulling a vacuum on all lines, opening the service valves to release the charge, monitoring the system during the first few cycles to insure everything is running perfectly.  Some fine tuning may be required as actual conditions may differ from test conditions.  If this work is not done properly it could result in problems that are beyond our control.  Therefore, it should only be performed by a qualified refrigeration technician.